Double-oriented shut-off valve
- Products
- Ball valve
- Butterfly valve
- Gate valve
- Globe Valve
- Check valve
- Anticorrosive valve
- Forged steel valve
- Regulating valve
- Hydraulic control valve
- Power station valve
- Drain valve
- Bellows valve
- Metallurgical valve
- Flame arrester and breathing valve
- Solenoid valve
- Needle valve
- Copper valve
- Ceramic valve
- Oil field valve
- Safety valve
- Actuator series
Nominal diameter: DN20 ~ 200mm
Nominal: PN10,16,40,64MPa
Temperature: -60 ~ 450 ℃
Main material: HT200, ZG230-450 ZG1Cr18Ni9Ti ZGOCr18Ni12M02Ti
Drive mode: pneumatic
Design criteria: GB / T17213
Method blue standard: GB / T9113, JB / T79 , HG20594 and other standard
Inspection standards: GB / T4213
Connection: flange (FF RF RTJ), welding (SW BW), the screw (for a "less)
Overview:
ZSQ dual-guided cut-off valve with top guide structure, equipped with multi-spring actuator. Has the advantages of compact structure, light weight, action-sensitive, S-streamline fluid flow line, small pressure drop loss, valve capacity, easy disassembly. Shut-off valve to accept the signal from the regulating instrument, cut off, open or change the media flow to achieve automatic control of process parameters such as pressure, flow, temperature or liquid level. Widely used in petroleum, chemical, metallurgy, electric power, light industry, textile and other industrial sectors of the production process automatic control and remote control system.
This series of products are film, piston two. The valve
body structure has a single seat, sleeve, two seats (three two-way)
three, the sealing form of packing seal and bellows seal two, the
product nominal pressure grade PN10,16,40,64 four, nominal diameter
Range DN20 ~ 200mm. For fluid temperature from -60 ~ 450 ℃. Leakage
level for the IV or Ⅵ level. Flow characteristics for the quick opening.
Features:
1,
Shut-off valve adopts multi-spring actuator and adjusting mechanism to
connect with three columns, the whole height can be reduced by about 30%
and the weight can be reduced by 30%.
2, the valve body designed by the principle of fluid mechanics such as
cross-section low flow resistance flow channel, the rated flow
coefficient increased by 30%.
3, the valve part of the seal has two types of tight and soft seal,
close-type surfacing carbide, soft seal for the soft material
production, sealing performance when closed.
4, balanced type trim, improve the allowable pressure drop off valve.
5, the bellows sealed type of valve stem to form a complete seal, blocking the possibility of media leakage.
6, piston-type actuator, operating force, the use of large pressure.
Main dimensions:
| DN | L | A | H | L 1 | H 1 | A 1 | Weight (Kg) | Signal connector internal thread |
| 20 | 150 | 130 | 220 | 80 | 115 | 100 | 10 | M10X1 |
| 25 | 160 | 130 | 220 | 80 | 120 | 100 | 12 | |
| 32 | 180 | 150 | 235 | 80 | 130 | 100 | 15 | |
| 40 | 200 | 150 | 235 | 95 | 138 | 120 | 18 | |
| 50 | 230 | 150 | 240 | 95 | 155 | 120 | 25 | |
| 65 | 290 | 280 | 250 | 105 | 178 | 160 | 30 | |
| 80 | 310 | 280 | 260 | 105 | 207 | 160 | 40 | |
| 100 | 350 | 280 | 265 | 105 | 222 | 160 | 60 |
